EZ 90-Degree Adjustable Log Tenon Cutter

Similar to the EZ-45, the EZ-90 also is adjustable to cut from 1″ up to 3″ diameter tenons at the ends of logs and branches, and will fit any 1/2″ drill.

The EZ-90 cuts a flat shoulder instead of a beveled shoulder on the tenon, which is ideal for applications that require a log to be connected to flat surfaces, such as a post, wall, stair, or the bottom of a table.  There is more gluing area with the flat shoulder.

Included with each EZ-90:

• E-Z 90 Degree Tenon Cutter
• Two double-sided hardened steel blades.  The 90-Degree cutter uses two double-sided hardened steel blades to cut a tenon.  One blade is mounted on each cutting arm.
• 3/8″ drill bit for drilling pilot holes. By drilling a pilot hole into the end of the log to guide the cutter, you are assured of cutting a nice, straight tenon.  Whether you are making a regular straight tenon, or an angled tenon, the cutter will follow.  You won’t have to rely on “eye-balling” while cutting, and you won’t have gouged our inconsistent tenons, and a solid gluing surface throughout.
• 3/32″ Hex Key to adjust tenon size. The cutting arms are attached to the adjustment bar with two screws.  You simply loosen the screws and slide the arms to your desired width.  Please read the Manual for complete instructions on how to get proper diameter, and how to make a set-up block for an easy way to reset the size.
• 3/16″ Hex Key to add/remove/replace cutting blades.  Tiny little key to remove/replace the cutting blades.

Click here to view the full Product Manual for more specifications, photos, and tips & tricks on using the EZ Log Tenon Cutters.